Rohde & Schwarz R&S UPP, Руководство пользователя

Страница: 535 / 938

Instrument Functions
R&S
®
UPP
519 User Manual 1411.1055.32 ─ 10
Remote command:
DISPlay:FFT<n2>:A:YSOurce
on page 797
DISPlay:FFT<n2>:B:YSOurce
on page 797
Y-Source
Waveform graphic system
Used to select which measurement results obtained with the additional measurement
function
Waveform are displayed graphically as TRACE A or as TRACE B and dis-
played graphically on the left-hand or right-hand y-axis.
Section of the Analyzer Function panel:
For more information on Y Source (see Chapter 5.51, "Measured value Sequences" ,
on page 601).
"Off" No trace is displayed or an available trace is deleted.
"Level Chx, Level"
The level measurement result for
●
channel 1 or
●
channel 2 or
●
the channel number specified under the following "Channel"
parameter field in the case of a multichannel instrument
of the Waveform measurement function is displayed as Trace A or
Trace B over a time x-axis.
"File: Trace A" Trace A is loaded from a file. The file name is entered in the subse-
quent parameter field.
"File: Trace B" Trace B is loaded from a file. The file name is entered in the subse-
quent parameter field.
Remote command:
DISPlay:WAVeform<n2>:A:YSOurce
on page 798
DISPlay:WAVeform<n2>:B:YSOurce
on page 798
Y-Source
Bar Graph graphic system
Curve, Spectrum and Bar Graph Display