Rohde & Schwarz R&S UPP, Руководство пользователя

Страница: 54 / 938

Startup
R&S
®
UPP
38 User Manual 1411.1055.32 ─ 10
the instrument is in the same state as it was before power-off. After booting is com-
pleted, the audio analyzer screen is displayed and the instrument can be operated
manually via an external keyboard and a mouse or via remote control.
2.3.3.3 Restarting the R&S UPP
●
Without connected monitor
Press the standby mode pushbutton. The BUSY LED and the READY LED extin-
guish at the same time. The POWER LED changes from green to orange after a
while. Press the standby mode pushbutton again. After the READY LED is green
again, the instrument is ready for operation.
●
With connected monitor, ext. keyboard and mouse
If the R&S UPP firmware was closed without shutting down the operating system
(e.g. by clicking on the icon in the title bar or ALT F4 on the keyboard), the pro-
gram can be restarted with the mouse in two ways:
–
Clicking on the "R&S UPx firmware" icon on the desktop
– Clicking on the Start button in the taskbar, and then selecting the folders "All
Programs, Rohde & Schwarz, UPP" and clicking on the "R&S UPx firmware"
icon
●
With remote control
You can also shut down the operating system by using the "SYSTem:SHUTdown"
command.
In case of an unexpected software lockup, the instrument can be rebooted only by
switching the power switch on and off again and pressing the standby mode pushbut-
ton. When using an external monitor, an external keyboard and a mouse, we recom-
mend carrying out a warm start first using the shortcut Ctrl+Alt+Del (restart) or trying
the Restart icon with the green arrow.
2.3.3.4 Switching Off
Risk of data loss
There is a risk of data loss if the R&S UPP is shut down without shutting down the
operating system first. This may cause trouble during the boot process the next time
the instrument is switched on.
We strongly recommend shutting down the operating system
before switching off the
instrument ([SHUTDOWN] button or via mouse operation). Shutting down the operat-
ing system ensures that open files are closed properly.
●
Without connected monitor
Press the standby mode pushbutton. The BUSY LED and the READY LED extin-
guish at the same time. The POWER LED changes from green to orange. If neces-
Putting into Operation