manualshive.com logo in svg

Rohde & Schwarz R&S UPP, Руководство пользователя

Поделиться
Скачать
Rohde & Schwarz R&S UPP Скачать руководство пользователя страница 182

Manual Operation

R&S

®

 UPP

166

User Manual 1411.1055.32 ─ 10

In order to analyze individual scans with cursors, the cursor is switched to the desired
scan in the following way:

●

External PC keyboard: with the keys ALT + PAGE

 

UP and ALT + PAGE

 

DOWN

●

Mouse: by clicking the "Scan" field shown above

Operating the markers

Activating the "Marker" button displays the marker softkeys:

The user must first select the trace on which a marker is to be set. The next softkey
level appears simultaneously:

The two buttons 

"Set to O-Curs"

 and 

"Set to X-Curs"

 set the marker to the value of

the currently selected cursor.

●

"Set to Value "

Sets marker to a value that can be entered later in an input field that appears in the
area of the softkeys

●

"Track to Max"

sets a marker at the maximum value of the curve. If the maximum value changes, the
marker is set at the new maximum value.

●

"Harm "

marks harmonics of the frequency indicated by the marker.

If no marker has been set, activating the "Harmonics" button sets the marker to the
maximum value of the trace and calculates and marks the harmonics from this fre-
quency.

●

"Off"

button deactivates the marker and the indication of the harmonics.

Zooming the graph

Activating the "Zoom" button displays the zoom functions.

Measurement Displays

Содержание R&S UPP











































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды