Rohde & Schwarz R&S UPP, Руководство пользователя

Страница: 128 / 938

Manual Operation
R&S
®
UPP
112 User Manual 1411.1055.32 ─ 10
4 Manual Operation
4.1 Introduction - Manual Operation
The R&S UPP audio analyzer is available in three model variants that differ about the
number of analog analyzer channels: The R&S UPP can be ordered with 8 (R&S
UPP800), 4 (R&S UPP400) or 2 (R&S UPP200) channels. All models are optimized for
use in production with remote control interfaces and are offered without display, without
front panel controls and without CD/DVD drive. To enable a convenient manual control,
the instrument can be equipped with an external monitor, an external keyboard and a
mouse. All models feature the same functions.
The R&S UPP audio analyzer uses a Windows operating system. The instrument is
therefore operated in largely the same way as other Windows applications. All panels
and display windows have the standard Windows format and are operated in the same
way. An external monitor, an external keyboard and/or mouse allow direct and conven-
ient access to entries and settings. The clearly organized display shows the current
state of the audio analyzer.
If the R&S UPP model is to be operated manually, you need to connect an external
monitor, a mouse and a computer keyboard. In the "Overview of Keys" section at the
end of this chapter, the keys or shortcuts on a computer keyboard and their function for
the manual control are listed. For additional notes for the control via mouse and key-
board, see
Chapter 4.3.2, "Operation Using the Mouse" , on page 120 and Chap-
ter 4.3.3, "Operation Using an External Computer Keyboard" , on page 120.
The use of the toolbar simplifies the operation when using the mouse. See Chap-
ter 4.9, "Settings in the Menu Bar" , on page 170.
Numerous online help functions assist the user in making settings.
After being switched on, the instrument is in the same state as it was before it was
switched off. This applies to all setting parameters of the R&S UPP, including the set-
tings not currently displayed on the screen.
The following chapter describes the manual operation of the R&S UPP audio analyzer.
This includes a description of the screen displays, how to operate the panels and how
to set parameters. Each of the setting descriptions is accompanied by a table explain-
ing how the different functions are performed using an external computer keyboard or
mouse.
An overview of the keys, panels and display windows can be found at the end of this
chapter.
The functions of the R&S UPP audio analyzer are described in detail in Chapter 5,
"Instrument Functions" , on page 195. An explanation of the general operating concept
and a brief introduction that contains step-by-step configurations for initial measure-
ments is described in
Chapter 3, "Getting Started" , on page 72. The remote control of
Introduction - Manual Operation