Rohde & Schwarz R&S UPP, Руководство пользователя

Страница: 70 / 938

Startup
R&S
®
UPP
54 User Manual 1411.1055.32 ─ 10
3) the instrument lost its IP address that was configured with DHCP and
switched to Auto IP.
This state is called "error state" and normally can be resolved by the LCI mech-
anism (LAN reset). This mechanism is required by the LXI standard and can be
invoked with the "LAN RESET" button (key press > 10 s) on the front side of
the instrument (see
Chapter 2.2, "Description of the Rear Panel" , on page 30).
●
LAN LED is on
–
The instrument has a valid IP address and is reachable via TCP/IP.
●
LAN LED flashes
–
The instrument is in the "Device Indicator" state initiated by the WEB interface.
This state is required by the standard and is used for finding instruments in
racks (see
Chapter 2.10.3.4, "LXI Browser Interface" , on page 54).
2.10.3.3 LXI Default State of Network Settings
After a LCI (LAN reset), the instrument automatically reboots and starts up with follow-
ing LAN settings:
Parameter Setting
Hostname RSUPPvvv-xxxxxx
Description Audio Analyzer
TCP/IP Mode DHCP + Auto IP Address
Dynamic DNS Enabled
ICMP Ping Enabled
Negotiation Auto Detect
VXI-11 Discovery Enabled
Password for LAN Configuration LxiWebIfc
More information about the LXI standard is located on the LXI website under
http://www.lxistandard.org
or in the article about LXI in
"News from Rohde & Schwarz, 2006/II - 190".
2.10.3.4 LXI Browser Interface
The only information necessary for performing configuration via the LXI/Web interface
is the name of the instrument (which means its Windows name) in networks that oper-
ate with DHCP enabled, or its IP address in networks that operate with manual network
configuration. In rare cases where neither one of these names is known, it is also pos-
sible to derive the IP address from the MAC address, which is printed on the rear panel
of the instrument.
Connect R&S UPP to a Network (LAN)