Rohde & Schwarz R&S UPP, Руководство пользователя

Страница: 277 / 938

Instrument Functions
R&S
®
UPP
261 User Manual 1411.1055.32 ─ 10
Depending on the selected Play Mode, the playback duration can be
●
displayed ("Play Mode Total …") if the intention is to play back the WAV file in full;
●
entered ("Play Mode Time …") to reset or prematurely interrupt playback.
Note: If the sampling rate is increased afterwards, the playback duration may be
reduced.
Remote command:
SOURce:PLAY:TIME
on page 709
Volt Mode
The voltage mode determines the setting of the level for channels 1 and 2.
The maximum value depends on the configured DC offset. In the analog generator, the
maximum total voltage also depends on the settings for Output Type and Max Voltage
in the Generator Config panel.
This parameter field does not appear if coded audio formats are played back; see note
"Audio Format" on page 226.
"Ch2/1" The level of channel 2 is at a fixed ratio to the level of channel 1 and
can be set as a factor with the command "Volt Ch2/1".
"Ch1&2" The level can be set separately for Channel 1 and 2.
Remote command:
SOURce:VOLTage:SELect
on page 703
Volt Peak Ch1
Level of Channel 1.
This parameter field does not appear if coded audio formats are played back; see note
"Audio Format" on page 226.
Remote command:
SOURce:VOLTage<n2>
on page 699
Volt Peak Ch2
Level of channel 2 in "Volt Mode Ch1&2"
This parameter field does not appear if coded audio formats are played back; see note
"Audio Format" on page 226.
Remote command:
SOURce:VOLTage:CH2Stereo
on page 702
Volt Ch2/1
Ratio of the level of both channels relative to channel 1 in "Volt Mode Ch2/1".
Generator Signals