Rohde & Schwarz R&S UPP, Руководство пользователя

Страница: 465 / 938

Instrument Functions
R&S
®
UPP
449 User Manual 1411.1055.32 ─ 10
The color selection from the above color selection dialog above is mapped as RGB
string and can be configured here, if necessary. In each case, the decimal equivalent
of 12-bit long numeric values is mapped. With a lower color depth in the "Color Depth"
selection field in the Config range of the generator, the corresponding LSBs are not
transmitted, but set to 0.
Remote command:
SENSe[1]:LIPSync:COLor:THReshold:HIGH:STRing
on page 770
Low
This threshold defines the condition of the audio trigger for the Lip Sync measurement.
If the supplied audio data are processed in the device under test (e.g. filtering), a value
greater than 0 should be defined. In such a case, the audio signal on the input side
with defined signal and mute frames will no longer show any exact zero sample phases
at the output of the device under test. It should be noted that the measurement result is
always falsified in this case which can be seen in the following representation.
Remote command:
SENSe[1]:LIPSync:AUDio:THReshold:LOW
on page 769
5.33 BERT analysis
Available only with the R&S UPP-K45 (expanded audio/video measurements) option.
BERT analysis