Rohde & Schwarz R&S UPP, Руководство пользователя

Страница: 446 / 938

Instrument Functions
R&S
®
UPP
430 User Manual 1411.1055.32 ─ 10
Suffix
No. Content of data buf-
fer Description
27 CH2 d7
28 CH2 d8
29 CH2 d9
30 to 39 Raw data for Ch3 Raw data for Ch3 to Ch8, as described for Ch1.
40 to 49 Raw data for Ch4
50 to 59 Raw data for Ch5
60 to 69 Raw data for Ch6
70 to 79 Raw data for Ch7
80 to 89 Raw data for Ch8
The data can be read out from the user
‑
definable data buffers in the basic unit. If the
data is to be read out in the unit that is set in the sweep graphic, the Chapter 7.5.5,
"Output of Trace Data Sets" , on page 738 TRACe:SWEep<i>:LOAD commands can be
used. For a comparison of these commands, see
SYSTem:MEMory:DATA<n3>
on page 826.
5.30 Analysis in the Time Domain
Besides analysis in the frequency domain, the R&S UPP can also be used to analyze
input signals in the time domain. Time and frequency-domain analyses can be per-
formed simultaneously and irrespective of the selected measurement function.
5.30.1 Waveform Monitor
The waveform monitor is used for signal analysis in the time domain. Both channels of
the active analyzer can be measured and displayed simultaneously and synchronously.
●
The "Analyzer Function" panel is used to activate the waveform monitor and to
configure its trigger condition and memory depth. The Waveform graphical window
can also be opened from here.
●
The scaling (including limit checking and the reference source) are selected in the
Waveform Config panel.
●
The graphical display is shown in the Waveform graphical window.
Analysis in the Time Domain