Rohde & Schwarz R&S UPP, Руководство пользователя

Страница: 101 / 938

Getting Started
R&S
®
UPP
85 User Manual 1411.1055.32 ─ 10
Entering a Numeric Value
Numeric values can be entered or edited in these fields.
The following always applies: Entries outside the possible value range are not accep-
ted; an audible warning is issued and the entry is changed to its permissible minimum
or maximum value. The possible value range is displayed above the softkey bar.
Edit mode:
When the focus is moved to a numeric entry field, the system enters Edit mode, which
is indicated by a green selection frame. The new value is entered via the external key-
board.
The numeric entry field is closed with:
●
ENTER on the external keyboard or clicking in another panel area adopts the
newly entered value.
●
Pressing ESC on the external keyboard retains the old value.
●
Softkeys – The selected unit is set and adopted together with the newly entered
value.
The entered value is set in the hardware as soon as the numeric entry field is closed.
Direct mode:
It is also possible to enter the value in Direct mode. Changing to Direct mode is per-
formed by pressing the ENTER key of the external keyboard; the color of the selection
frame then changes to magenta.
A digit can now be entered using the external keyboard; the digit at the cursor position
is replaced.
In Direct mode, every setting change is immediately passed on to the hardware and
executed. Direct mode can be exited using the ENTER or ESC key on the external
keyboard.
Entering/Changing the Unit of a Value
The unit of a numeric value is displayed next to the entry field.
When the value is entered, all units available for the respective function are offered on
the softkey bar (on more than one level where necessary). The entry can be completed
by selecting the unit using a softkey.
This is done differently depending on the selected mode:
●
In Edit mode, the newly entered numeric value is adopted and set together with the
selected unit.
Brief Introduction to Operation