Rohde & Schwarz R&S UPP, Руководство пользователя

Страница: 836 / 938

Remote Control - Command Description
R&S
®
UPP
820 User Manual 1411.1055.32 ─ 10
PEAK
Same between partial curve peaks
HARMonic
Same in the FFT display between harmonics
Example: DISPlay:WAVeform:OCURsor:POSMode POINt
DISPlay:FFT<n2>:OCURsor:SETTo:MAX <state>
DISPlay:FFT<n2>:XCURsor:SETTo:MAX <state>
DISPlay:WAVeform<n2>:OCURsor:SETTo:MAX <state>
DISPlay:WAVeform<n2>:XCURsor:SETTo:MAX <state>
DISPlay:BARGraph<n2>:OCURsor:SETTo:MAX <state>
DISPlay:BARGraph<n2>:XCURsor:SETTo:MAX <state>
DISPlay:SWEep<n2>:OCURsor:SETTo:MAX <state>
DISPlay:SWEep<n2>:XCURsor:SETTo:MAX <state>
Corresponds to softkey operation:
Cursor
Set O-Cursor | Set X-Cursor,
Max
Parameters:
<state> ONCE | EXEC
ONCE or EXEC can also be omitted.
ONCE
Sets O cursor | X Cursor to the curve peak.
EXEC
Alias to ONCE.
Example: DISPlay:SWEep4:OCURsor:SETTo:MAX
DISPlay:SWEep4:OCURsor:SETTo:MAX ONCE
DISPlay:SWEep4:OCURsor:SETTo:MAX EXEC
the three commands are equivalent.
DISPlay:FFT<n2>:OCURsor:SETTo:MIN <state>
DISPlay:FFT<n2>:XCURsor:SETTo:MIN <state>
DISPlay:WAVeform<n2>:OCURsor:SETTo:MIN <state>
DISPlay:WAVeform<n2>:XCURsor:SETTo:MIN <state>
DISPlay:BARGraph<n2>:OCURsor:SETTo:MIN <state>
DISPlay:BARGraph<n2>:XCURsor:SETTo:MIN <state>
DISPlay:SWEep<n2>:OCURsor:SETTo:MIN <state>
DISPlay:SWEep<n2>:XCURsor:SETTo:MIN <state>
Corresponds to softkey operation:
Cursor
Set O-Cursor | Set X-Cursor,
Softkey Commands of the Graphical Display