Rohde & Schwarz R&S UPP, Руководство пользователя

Страница: 557 / 938

Instrument Functions
R&S
®
UPP
541 User Manual 1411.1055.32 ─ 10
"File Intern" Available in the graphics subsystems
Sweep, FFT, Bar Graph
Sweep, FFT, Bar Graph, PESQ/POLQA, Impulse Response
Sweep, FFT, Bar Graph
"File Intern" has to be offered and displayed only if "File:Trace
A or
File: Trace B is set at "Y-Source" and a trace file containing limit
scans in addition to the data scans is loaded.
The Limit Lower curve from the trace file is displayed in the graph and
all scans (except the Min/Max scans) are compared to this limit curve.
"Hold" Available in the graphics subsystems
Sweep, FFT, Waveform, Bar Graph
The limit value or limit trace is no longer changed. If a trace file is loa-
ded with limit value or limit trace, the limit values from the file are not
applied but instead the previously set limit value or limit trace is used.
If "Hold" is selected when no valid limit trace data is already available,
a warning is issued and the last valid Limit selection is reset.
Remote command:
DISPlay:SWEep<n2>:A:LIMLower:SOURce
on page 792
DISPlay:SWEep<n2>:B:LIMLower:SOURce
on page 792
Source Value
Lower limit value if "Value" has been selected under "Source".
Available in the graphics subsystems
Sweep, FFT, Waveform, Bar Graph
Remote command:
DISPlay:SWEep<n2>:A:LIMLower:SOURce:VALue
on page 792
DISPlay:SWEep<n2>:B:LIMLower:SOURce:VALue
on page 792
Source Filename
Filename for a lower limit curve if "File" has been selected under "Source".
Available in the graphics subsystems
Sweep, FFT, Bar Graph
Sweep, FFT, Bar Graph, PESQ/POLQA, Impulse Response
Sweep, FFT, Bar Graph
Remote command:
DISPlay:SWEep<n2>:A:LIMLower:SOURce:FILE
on page 792
DISPlay:SWEep<n2>:B:LIMLower:SOURce:FILE
on page 792
Limit Shift
Curve, Spectrum and Bar Graph Display