Rohde & Schwarz R&S UPP, Руководство пользователя

Страница: 835 / 938

Remote Control - Command Description
R&S
®
UPP
819 User Manual 1411.1055.32 ─ 10
Cursor
X cursor,
X Vert A | X Vert B | X Vert A-B, X Hor A | X Hor B
Parameters:
<mode> VA | VB | VAB | HA | HB
VA
O cursor becomes vertical cursor on trace A
VB
Same on trace B
VAB
Same on trace A and trace B and shows difference between Y
values.
HA
O cursor becomes horizontal cursor on trace A
HB
Same on trace B
Example: DISPlay:BARGraph:XCURsor:MODE VA
DISPlay:FFT<n2>:OCURsor:POSMode <posmode>
DISPlay:FFT<n2>:XCURsor:POSMode <posmode>
DISPlay:WAVeform<n2>:OCURsor:POSMode <posmode>
DISPlay:WAVeform<n2>:XCURsor:POSMode <posmode>
DISPlay:BARGraph<n2>:OCURsor:POSMode <posmode>
DISPlay:BARGraph<n2>:XCURsor:POSMode <posmode>
DISPlay:SWEep<n2>:OCURsor:POSMode <posmode>
DISPlay:SWEep<n2>:XCURsor:POSMode <posmode>
Corresponds to softkey operation:
Cursor
O cursor | X cursor
Movement
Next Pixel | Next Bin | Next Sample | Next Value | Next Step | Next Peak | Next Har-
monic
Parameters:
<posmode> PIXel | POINt | PEAK | HARMonic
PIXel
Pixel-by-pixel cursor movement
POINt
Same between reference points. An easy-to-remember term is
offered for each subsystem in the softkey menu, such as "Next
Bin" for FFT, "Next Sample" for waveform, "Next Value" for bar-
graph and "Next Step" for sweep; the generic term
POINt
is
used for IEC/IEEE bus control to simplify matters.
Softkey Commands of the Graphical Display