manualshive.com logo in svg

Rohde & Schwarz R&S UPP, Руководство пользователя

Поделиться
Скачать
Rohde & Schwarz R&S UPP Скачать руководство пользователя страница 92

Getting Started

R&S

®

 UPP

76

User Manual 1411.1055.32 ─ 10

3.3.3

 

Panels and Display Windows

The R&S UPP audio analyzer distinguishes between the following panels and display
windows:

●

Quickstart panel

 for quick launching of the most commonly used audio measure-

ment tasks.

●

Panels

 used to perform function settings.

●

Configuration panels

 used for configuring how the measurement values are to be

displayed.

●

Numeric display fields

 for displaying the measurement values of the various mea-

surement functions.

●

Combo displays

 in which numeric measurement values can be supplemented by

bar graphs and limit monitoring.

●

Graphical windows

 in which measurement values are displayed in the form of dia-

grams.

●

Data lists

 in which the measurement values are listed in tabular form.

Panels are moved to the currently visible screen by moving the mouse pointer to the
left side of the screen to activate the menu bar, moving the mouse to "Instruments" or
"DispConfig" and clicking the desired panel in the pulldown menu that opens.

Display windows are selected in the same way, except that they are listed under the
"Displays" menu item.

The quickstart panel has a special role and can only be opened by clicking the rocket
icon in the toolbar.

Each panel and display window is a separate window which can be either closed,
opened or hidden. Panels/display windows are open if they are visible on the currently
displayed screen; if the window is minimized and moved to the bottom edge of the
screen, it is referred to as hidden.

As soon as a panel/display window can be operated, it can be moved on the screen
and adjusted in size: Grab the panel at the title bar with the mouse and move it. The
size of the panels can be changed by grabbing the edges or corners of the panels with
the mouse and moving them.

The same panel / display window can be displayed in several screens at the same
time. The display characteristics can be different for each of the screens; the content
is, however, always the same.

Brief Introduction to Operation

Содержание R&S UPP











































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды