Rohde & Schwarz R&S UPP, Руководство пользователя

Страница: 613 / 938

Instrument Functions
R&S
®
UPP
597 User Manual 1411.1055.32 ─ 10
"Store Reference " The current measured value is stored as a reference value. If, for exam-
ple, the reference unit dBr is selected as the unit, the next measured
value is 0.0
dBr.
"Autoscale " One-time scaling of the bargraph on the basis of the minimum and maxi-
mum values. Corresponds to
in the associated configuration panel.
"Show Min Max " If the box is checked, the min/max values are displayed. Corresponds to
in the associated configuration panel.
"Show Lim Low " If the box is checked, the lower limit is displayed. Corresponds to
in the associated configuration panel.
"Show Lim Upp " If the box is checked, the upper limit is displayed. Corresponds to
in the associated configuration panel.
"Restart Min/Max " Resets min/max value recording and the collection of measured values
begins again. Corresponds to [START]
"Restart Lim Violation " Resets the red color marking (measured value, bar and limit) for indicat-
ing a limit violation and restarts a test for a limit violation.
"Config " Opens the configuration panel for this combo display.
5.50 Limit Monitoring
Both traces/bar graphs and measurement results can be monitored to determine
whether limits or limit curves have been overranged or underranged.
5.50.1 Traces and Bar Graphs
Upper and lower limits or a limit curve can be entered separately for Trace A and
Trace B in every display configuration panel for every graphic subsystem.
Limit entered as a value:
The limit in a graphical display is shown as a straight line.
Limit Monitoring