Rohde & Schwarz R&S UPP, Руководство пользователя

Страница: 687 / 938

Remote Control - Fundamentals
R&S
®
UPP
671 User Manual 1411.1055.32 ─ 10
Bit no. Meaning
0 Measuring Ch2 (bit 1)
0 0 = Not used
0 1 = The information refers only to channel 2
1 0 = The information refers only to channel 1
1 1 = The information refers to both channels
3 Sweeping
This bit is set while the R&S UPP is performing a sweep. Bits 8 and 9 indicate the sweep sta-
tus.
2 Not used
1 Not used
0 Not used
6.8.7 STATus:QUEStionable Register
This register contains information about questionable device statuses. These may
occur when the device is operated beyond its specifications. It can be read by the
queries
STATus:QUEStionable:CONDition?
or
STATus:QUEStionable[:EVENt]?
Reading the EVENt part deletes its content!
Bit no. Meaning
15 Not used
14 Not used
13 Not used
12
11
10
Generator status
Bit 12, 11, 10
0 0 0 = Not used
0 0 1 = Generator Off Both generator channels are off
0 1 0 = Generator Running Generator outputs signal
0 1 1 = Not used
1 0 0 = Generator Halted Generator outputs zero level
1 0 1 = Not used
1 1 0 = Generator Overload Generator overloaded, output disabled
1 1 1 = Output Off Output disabled
9 Not used
8 Not used
Status Reporting System