Rohde & Schwarz R&S UPP, Руководство пользователя

Страница: 761 / 938

Remote Control - Command Description
R&S
®
UPP
745 User Manual 1411.1055.32 ─ 10
TRACe:SWEep<n2>:LDList:COUNt:AY?
TRACe:SWEep<n2>:LDList:COUNt:BX?
TRACe:SWEep<n2>:LDList:COUNt:BY?
The
TRACe:SWEep<n2>:LDList:...
commands are basically identical to the
TRACe:SWEep<n2>:LOAD:...
commands, see
TRACe:SWEep<n2>:LOAD:BY?
on page 742.
They query the data records of filtered trace data and their number.
The filtering of the trace data is performed with command
DISPlay:SWEep<n2>:DLISt:FILTer ALL | LIMUpper | LIMLower |
LIMBoth | HARMonics | PEAKs
Suffix:
<n2>
.
1 ... 4
subsystems 1 to 4
Return values:
<argument> integer | float | binary
For the
COUNt
commands, an integer value is returned.
The format of the return values of the other commands depends
on the
FORMat
setting:
If
FORMat ASCii
is selected float values are returned.
If
FORMat REAL
is selected a binary data block is returned.
Usage: Query only
TRACe:FFT<n2>:LDList:AX?
TRACe:FFT<n2>:LDList:AY?
TRACe:FFT<n2>:LDList:BX?
TRACe:FFT<n2>:LDList:BY?
TRACe:FFT<n2>:LDList:COUNt:AX?
TRACe:FFT<n2>:LDList:COUNt:AY?
TRACe:FFT<n2>:LDList:COUNt:BX?
TRACe:FFT<n2>:LDList:COUNt:BY?
The
TRACe:FFT<n2>:LDList:...
commands are basically identical to the
TRACe:FFT<n2>:LOAD:...
commands, see
TRACe:FFT<n2>:LOAD:COUNt:BY?
on page 743 .
They query the data records of filtered trace data and their number.
The filtering of the trace data is performed with command
DISPlay:FFT<n2>:DLISt:FILTer ALL | LIMUpper | LIMLower | LIMBoth
| HARMonics | PEAKs
Suffix:
<n2>
.
1 | 2
subsystems 1 and 2
Return values:
<argument> integer | float | binary
For the
COUNt
commands, an integer value is returned.
Triggering Measurements and Reading Results