manualshive.com logo in svg

Rohde & Schwarz R&S UPP, Руководство пользователя

Поделиться
Скачать
Rohde & Schwarz R&S UPP Скачать руководство пользователя страница 170

Manual Operation

R&S

®

 UPP

154

User Manual 1411.1055.32 ─ 10

4.8.4.4

 

Bar Graph

If one of the functions "THD", "Mod Dist" or "DFD" is selected in the "Analyzer Func-
tion" panel, the function measurement result can be displayed broken down into its fre-
quency components on a bar graph. The individual distortion products are recorded
along a frequency axis. The structure of the distortion products (2nd, 3rd, 4th, nth har-
monic, DFD of 2nd or 3rd order, etc.) can be recognized at a glance. The bar graph
can display one or two channels; once again, the results can be saved and saved
results can be imported into the graph.

Two bar graphs are available so that, for example, THD values at two different mea-
surement points can be displayed or the measured values of both input channels can
be shown on two separate graphs.

4.8.4.5

 

Opening graphical windows

The graphical windows can be opened via the menu bar; they are called up using the
"Displays" button.

Depending on the channel number of the selected analyzer instrument, fonts and
menu structure for "Display" Function, Lev Mon, Input, Frequency and Phase measure-
ment results change.

Measurement Displays

Содержание R&S UPP











































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды