manualshive.com logo in svg

Rohde & Schwarz R&S UPP, Руководство пользователя

Поделиться
Скачать
Rohde & Schwarz R&S UPP Скачать руководство пользователя страница 629

Instrument Functions

R&S

®

 UPP

613

User Manual 1411.1055.32 ─ 10

5.54

 

Format

5.54.1

 

Trace Files

All trace data is stored in plain text in ASCII format. The format has been selected so
that the data can be processed without a problem in EXCEL.

Structure of the trace file:

The individual parameters are TAB separated.

Black: Explanation of fields. These explanations are not stored in the trace file.

Green: Fixed entries in ASCII format to facilitate assignment of the following data.

Red: Entries which change. These entries are depending on the graphic system and
the settings in the corresponding DispConfig panel.

FILE: Not a fixed value, but a trace. Can occur in the case of Limit and Reference.

VOID: No value present because the trace is turned off, or in order to fill a missing
range in the event that Trace A and Trace B have different lengths.

Explanation of terms:

Format

Содержание R&S UPP











































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды