Mitsubishi QJ71GP21-SX, Справочное руководство

Страница: 303 / 650

9
DEDICATED INSTRUCTIONS
9.1 List of Dedicated Instructions and Available Devices
9
- 1
9
DE
DICA
T
E
D
INS
T
RUCT
IONS
10
T
R
OUB
L
E
S
HO
OT
IN
G
APPENDI
CES
INDEX
CHAPTER9 DEDICATED INSTRUCTIONS
A "dedicated instruction" is defined as an instruction designed to make programming easy
for use of the intelligent function module functionality.
This chapter describes the dedicated functions available for the CC-Link IE controller
network module.
9.1 List of Dedicated Instructions and Available Devices
(1) List of dedicated instructions
The following list shows the dedicated instructions that can be used for CC-Link IE
controller network modules.
(a) List of link dedicated instructions
* 1 Not available when the source or target station is a safety CPU.
* 2 Writing is not allowed from another station to a safety CPU.
Table 9.1 List of link dedicated instructions
Application
Dedicated
instruction
Description
Reference
section
Read from/write to
other station devices
(for Q/QnA series)
READ
Reads data from devices of a programmable controller on another station. (In
units of words)
Section 9.3
SREAD
Reads data from devices of a programmable controller on another station. (In
units of words)
With the SREAD instruction, a device on another station turns ON when data
reading is completed. (The other station can recognize that data have been read
out with the SREAD instruction.)
Section 9.4
WRITE
Writes data to devices of a programmable controller on another station. (In units
of words)
*2
Section 9.5
SWRITE
Writes data to devices of a programmable controller on another station. (In units
of words)
*2
With the SWRITE instruction, a device on another station turns ON when data
writing is completed. (The other station can recognize that data have been written
with the SWRITE instruction.)
Section 9.6
Transient request to
another station
(for Q/QnA series)
REQ
Requests remote RUN/STOP to a programmable controller on another station.
*1 Section 9.7
Reads clock data from or writes them to a programmable controller on another
station.
*2
Section 9.8
Data send/receive
(for Q/QnA series)
SEND
Sends data to a programmable controller on another station.
*1
Section 9.9
RECV
Reads data received from a programmable controller on another station.
*1
(For main program)
Section 9.10
RECVS
Reads data received from a programmable controller on another station.
*1
(For interrupt program)
Section 9.11
Read from/write to
other station devices
(For A series)
ZNRD
Reads data from devices of a programmable controller on another station. (In
units of words)
*1
Section 9.12
ZNWR
Writes data to devices of a programmable controller on another station. (In units
of words)
*1
Section 9.13
Remote RUN/STOP
(for Q series)
RRUN
Instructs a programmable controller on another station to run remotely.
*1
Section 9.14
RSTOP
Instructs a programmable controller on another station to stop remotely.
*1
Section 9.15
Read/write of another
station's clock data
(for Q series) RTMRD Reads clock data from a programmable controller on another station. Section 9.16
RTMWR
Writes clock data to a programmable controller on another station.
*2
Section 9.17