manualshive.com logo in svg

Mitsubishi QJ71GP21-SX, Справочное руководство

Mitsubishi QJ71GP21-SX - это устройство с возможностью скачать бесплатно Руководство по эксплуатации для полного понимания его функций. Скачайте справочное руководство с сайта {веб-сайт} для удобства использования этого продукта. Наслаждайтесь простотой и эффективностью Mitsubishi QJ71GP21-SX.

Поделиться
Скачать
background image

A

 - 16

DEFINITIONS OF TERMINOLOGY

Definitions of the terms used in this manual are explained below.

Term

Description

Cyclic transmission

Using the link devices (LB/LW/LX/LY) of the CC-Link IE controller network module, data can be 
transferred periodically between stations on the same network.
• LB/LW is used to send data of one station to all stations. (1:N communication)
• LX/LY is used to send data of one station to another station. (1:1 communication)

Transient transmission

This function allows communication with another station when a request is made with a 
dedicated instruction or from GX Developer.

Link dedicated instruction

Dedicated instruction that is used for transient transmission with other programmable 
controllers.
Communications can be made with programmable controllers on the same or other networks.

CC-Link dedicated 
instruction

Dedicated instruction that is used for transient transmission with CC-link IE controller network 
compatible devices. This allows communication with a station on the same network.

RAS

Abbreviation for Reliability, Availability, and Serviceability.
This term is used to express the overall usability of automation systems.

Control station

Only one station that controls the network to which it is connected. 
Each station's send range for cyclic transmission is assigned to the control station.

Normal station

Station that performs cyclic transmission according to the range assignment of the control 
station.

Reserved station

Station that is not actually connected to the network.
It must be included in the total number of stations in the network, since it is to be connected in 
the future.

Relay station

Station that relays transient transmission data to another network.
Link device data of a network module are transferred to another network module via this station.
Multiple network modules are connected to one programmable controller.

Undefined station

Station to which a station No. is to be set in the sequence program, however, that has presently 
no station No. because the UINI instruction has not been executed yet.

Reconnection

Processing of restarting data link when a faulty station becomes normal.

Disconnection

Processing of stopping data link when a data link error occurs.

Device

Devices (X, Y, M, D, etc.) that are contained in a CPU module.

Link device

Devices  (LB/LW/LX/LY) that are contained in a CC-Link IE controller network module.

Link scan time

Time required for data of each station to be sent in order and to make one rotation in the 
network.
The link scan time changes depending on the data volume or transient transmission request.
Link scans are performed "asynchronously" with sequence scans of the CPU module.

Link refresh

Processing of data transfer between link devices of the CC-Link IE controller network module 
and CPU module devices.
Link refresh is performed in "END processing" of the sequence scan of the CPU module.

Buffer memory

Memory area in the CC-Link IE controller network module, in which data are temporarily stored.

Baton pass

A control mechanism in which transmission right (token) is passed around the network for data 
transmission.

Control station switching 
time

Time taken from when the control station went down due to a reason such as power-off until 
data link is started by the sub-control station.

Shared group No.

Number that is assigned to a station to allow it to share cyclic data with any given stations.
Cyclic data can be shared only with stations of the same group.

Group No.

Number that is assigned for transient transmission to any given stations.
By specifying a group of stations as transient transmission target, data can be sent to the 
stations of the same group No.

Содержание QJ71GP21-SX











































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для QJ71GP21-SX

K&K M15 Manual preview
M15
Бренд: K&K Страницы: 6
KELCO F60 Installation Instructions Manual preview
F60
Бренд: KELCO Страницы: 36
Febco 860 Series Installation Instructions preview
860 Series
Бренд: Febco Страницы: 4
Cisco Catalyst 3110G Hardware Installation Manual preview
Catalyst 3110G
Бренд: Cisco Страницы: 48
Wave Italy IMPACT Installation, Use And Maintenance Manual preview
IMPACT
Бренд: Wave Italy Страницы: 16
TA Hydronics STS Technical Description preview
STS
Бренд: TA Hydronics Страницы: 14
Parker ER Series Maintenance Instructions & Parts List preview
ER Series
Бренд: Parker Страницы: 44
Samson 3756 Mounting And Operating Instructions preview
3756
Бренд: Samson Страницы: 56
EasyIO FG-20 Installation Manual preview
FG-20
Бренд: EasyIO Страницы: 17
Eaton S611 User Manual preview
S611
Бренд: Eaton Страницы: 96
K&G GROEP NANO MARINE Installation And Operation Manual preview
NANO MARINE
Бренд: K&G GROEP Страницы: 27
CAME TOP 432NA Quick Start Manual preview
TOP 432NA
Бренд: CAME Страницы: 2
CalAmp LMU 2630MB Installation Manual preview
LMU 2630MB
Бренд: CalAmp Страницы: 13
brel-motors DC-458 Manual preview
DC-458
Бренд: brel-motors Страницы: 2
hager ZZ45WAN2PP Mounting Instructions preview
ZZ45WAN2PP
Бренд: hager Страницы: 2
hager TYB601A Quick Start Manual preview
TYB601A
Бренд: hager Страницы: 4
IBA MS8xICP Manual preview
MS8xICP
Бренд: IBA Страницы: 29
Parker PSST8M23A Installation & Service Instructions Manual preview
PSST8M23A
Бренд: Parker Страницы: 8

Бренды по названию

Популярные бренды

Загрузить еще бренды