Mitsubishi QJ71GP21-SX, Справочное руководство

Страница: 367 / 650

9
DEDICATED INSTRUCTIONS
9.8 J(P)/G(P).REQ (Reading/Writing Clock Data)
9
- 65
9
DE
DICA
T
E
D
INS
T
RUCT
IONS
10
T
R
OUB
L
E
S
HO
OT
IN
G
APPENDI
CES
INDEX
9.8 J(P)/G(P).REQ (Reading/Writing Clock Data)
With the REQ instruction, clock data are read from or written to a programmable controller
on another station.
(1) Setting data
* 1 Local devices and file registers for each program cannot be used as devices in setting data.
Table 9.33 Devices available for setting data
Setting
data
Available devices
Internal device
(System, User)
File
register
Link direct device
J \
Intelligent
function module
device
U \G
Index
register Zn
Constant
Others
Bit Word Bit Word K,H $
(S1) — —
(S2) — —
(D1) — —
(D2) —
Figure 9.57 Instruction format
Table 9.34 Setting data
Setting data
*1
Description Data type
Jn
Network No. of the own station (1 to 239, 254)
254: The network specified in Valid module during other station access
Binary 16 bits
Un
Start I/O number of the own station's CC-Link IE controller network module
(00 to FE
H
: The higher two digits of the 3-digit I/O number)
(S1)
Start device of the own station that stores control data
( (2) Control data, request data, and response data in this section)
Device name (S2)
Start device of the own station that stores request data
( (2) Control data, request data, and response data in this section)
(D1)
Start device of the own station that will store response data
( (2) Control data, request data, and response data in this section)
(D2)
The own station's device that is turned on for one scan upon completion of the
instruction
(D2)+1 also turns ON if the instruction execution has failed.
Bit
J.REQ
Start contact
[Instruction format] [Execution condition] [Instruction symbol]
JP.REQ
Start contact
J.REQ
Jn (S1) (S2) (D1) (D2)
JP.REQ
Jn (S1) (S2) (D1) (D2)
G.REQ
Start contact
GP.REQ
Start contact
G.REQ Un (S1) (S2) (D1) (D2)
GP.REQ Un (S1) (S2) (D1) (D2)