Mitsubishi QJ71GP21-SX, Справочное руководство

Страница: 370 / 650

9
- 68 9.8 J(P)/G(P).REQ (Reading/Writing Clock Data)
9
DEDICATED INSTRUCTIONS
* 1 The setting side is as shown below.
User: Before execution of the link dedicated instruction, data must be set by the user.
System: The CPU module stores the execution result of the link dedicated instruction.
* 2 Data are valid only when 1 is set in bit 7 of Error completion type ((S1)+0).
(S1)+12
to
(S1)+15
Clock data on error
completion
*2
Clock data on error completion are stored in BCD format.
When the target station is QnACPU, "00
H
" is stored in the Year field
(first two digits of the year).
— System
(S1)+16
Error-detected
network No.
*2
Network No. of the station, where an error was detected, is stored.
(However, when an error is detected at the own station, the network
No. is not stored.)
1 to 239: Network No.
— System
(S1)+17
Error-detected
station No.
*2
Station No. of the station, where an error was detected, is stored.
(However, when an error is detected at the own station, the station
No. is not stored.)
1 to 120: Station No.
— System
Table 9.35 Control data (Continued)
Device Item Setting data Setting range
Setting
side
*1
(S1)+12
(S1)+13
(S1)+14
(S1)+15
Month (01
H
to 12
H
)
Hour (00
H
to 23
H
)
Second (00
H
to 59
H
)
Day (01
H
to 31
H
)
Minute (00
H
to 59
H
)
00
H
(Sun.) to 06
H
(Sat.)
Day of week (00
H
to 06
H
) Year (00
H
to 99
H
) First 2 digits
Year (00
H
to 99
H
) Last 2 digits
b15 b8 b7 to b0 to