Mitsubishi QJ71GP21-SX, Справочное руководство

Страница: 477 / 650

9
DEDICATED INSTRUCTIONS
9.20 J(P)/G(P).RIWT
9
- 175
9
DE
DICA
T
E
D
INS
T
RUCT
IONS
10
T
R
OUB
L
E
S
HO
OT
IN
G
APPENDI
CES
INDEX
(2) Control data
(a) Control data
* 1 The setting side is as shown below.
User: Before execution of the dedicated instruction, data must be set by the user.
System: The CPU module stores the execution result of the dedicated instruction.
(b) Access code/Attribute code
* 1 Devices other than the above are not accessible.
For access to a bit device, specify 0 or multiples of 16.
* 2 When the target station is other than the CC-Link IE controller network module, refer to the manual
for the target station for the access and attribute codes.
Table 9.110 Control data
Device Item Setting data Setting range
Setting
side *1
(S)+0 Completion status
The instruction completion status is stored.
0: Normal
Other than 0: Error ( Section 10.2 Error Code List)
When the target station is other than the CC-Link IE controller
network module, refer to the manual for the target station for error
codes.
— System
(S)+1 Target station No. Specify the station No. of the target station. 1 to 120 User
(S)+2
Access code/
Attribute code
Specify the access and attribute codes of the write target device.
Refer to (b) User
(S)+3 Device No. Specify the start No. of the device to which data are written. Within device range User
(S)+4
Number of points
to write
Specify the size of the data to be written in units of words. 1 to 480 User
Table 9.111 Access code/Attribute code
Device contents
*1
Name
Device type
Unit
Access code
*2
Attribute code
*2
Bit Word
Input relay X Hexadecimal 01
H
05
H
Output relay Y Hexadecimal 02
H
Internal relay M Decimal 03
H
Latch relay L Decimal 83
H
Link relay B Hexadecimal 23
H
Timer (contact) T Decimal 09
H
Timer (coil) T Decimal 0A
H
Timer (present value) T Decimal 0C
H
Retentive timer (contact) ST Decimal 89
H
Retentive timer (coil) ST Decimal 8A
H
Retentive timer (present value) ST Decimal 8C
H
Counter (contact) C Decimal 11
H
Counter (coil) C Decimal 12
H
Counter (present value) C Decimal 14
H
Data register
*3
D Decimal 04
H
Link register
*3
W Hexadecimal 24
H
File register R Decimal 84
H
Link special relay SB Hexadecimal 63
H
Link special register SW Hexadecimal 64
H
Special relay SM Decimal 43
H
Special register SD Decimal 44
H
Access code
b15 to b8 b7 to b0
Attribute code