QoS Commands
ExtremeWare XOS 11.5 supports only the Summit X450 family of switches and the BlackDiamond 8800 series switch.
ExtremeWare XOS 11.5 Command Reference Guide
944
■
IQP5 - 5, Medium
■
IQP6 - 6, MediumHi
■
IQP7 - 7, High
■
IQP8 - 8, HighHi (highest priority)
Usage Guidelines
BlackDiamond 8800 a-series and e-series modules and Summit X450a and X450e switches only.
This
command also resets the minimum bandwidth to 0% and the maximum bandwidth to 100% for
egressing QoS profiles on the specified ports. There are no ingressing queues on the BlackDiamond 8800
series switch or the Summit X450 family of switches.
BlackDiamond 10808 switch only.
The number of ingress queues per port varies between the 1 Gbps I/O
module and the 10 Gbps module. On the 1 Gbps module, you have two ingress queues per port. The
priority values of 1 to 4 map to the first queue, and the priority values of 5 to 8 map to the second
queue. On the 10 Gbps module, you have eight ingress queues per port. The priority values of 1 to 8
map one to each of the eight queues.
Example
The following command resets the QoS profiles for all ports to default settings:
unconfigure qosprofile
History
This command was first available in ExtremeWare XOS 11.0.
Platform Availability
This command is available on all platforms.
The ingress parameter is available only on the BlackDiamond 10808 switch.
The parameters egress and ports are available only on the BlackDiamond 10808 and 12804 switch, the
BlackDiamond a-series and e-series modules, and the Summit X450a and X450e series switch.
