unconfigure sflow collector
ExtremeWare XOS 11.5 supports only the Summit X450 family of switches and the BlackDiamond 8800 series switch.
ExtremeWare XOS 11.5 Command Reference Guide
715
unconfigure sflow collector
unconfigure sflow collector {ipaddress} <ip-address> {port <udp-port-
number>} {vr <vrname>}
Description
Unconfigures the sFlow collector.
Syntax Description
Default
The following values are the defaults for this command:
●
UDP port number—6343
●
Virtual router—VR-Mgmt (previously called VR-0).
Usage Guidelines
NOTE
The BlackDiamond 8800 series switch and the Summit X450 family of switches do not support user-created VRs.
This command allows you to reset the specified sFlow collector parameters to the default values.
Both the commands
unconfigure sflow
and
unconfigure sflow collector
will reset the collector
parameters to the default.
Example
The following command removes the collector at IP address 192.168.57.1:
unconfigure sflow collector ipaddress 192.168.57.1
History
This command was first available in ExtremeWare XOS 11.0.
ip-address
Specifies the IP address of the collector to reset.
udp-port-number
Specifies the UDP port.
vrname
Specifies which virtual router.
NOTE: The BlackDiamond 8800 series switch and the Summit X450 family of
switches do not support user-created VRs.
