configure snmpv3 delete group user
ExtremeWare XOS 11.5 supports only the Summit X450 family of switches and the BlackDiamond 8800 series switch.
ExtremeWare XOS 11.5 Command Reference Guide
153
configure snmpv3 delete group user
configure snmpv3 delete group {[[hex <hex_group_name>] | <group_name>]}
user [all-non-defaults | {[[hex <hex_user_name>] | <user_name>] {sec-model
[snmpv1|snmpv2c|usm]}}]
Description
Deletes a user name (security name) from a group.
Syntax Description
Default
The default value for sec-model is USM.
Usage Guidelines
Use this command to remove the associate of a user name with a group.
As per the SNMPv3 RFC, a security name is model independent while a username is model dependent.
For simplicity, both are assumed to be same here. User names and security names are handled the same.
In other words, if a user is created with the user name
username
, the security name value is the same,
username
.
Every group is uniquely identified by a security name and security model. So the same security name
can be associated to a group name but with different security models.
The default groups are:
admin, initial, v1v2c_ro
,
v1v2c_rw
.
The default users are:
admin, initial, initialmd5, initialsha, initialmd5Priv, initialshaPriv
.
hex_group_name
Specifies the group name to delete or modify. The value is to be supplied as a
colon separated string of hex octets.
group_name
Specifies the group name to delete or modify in ASCII format.
all-non-defaults
Specifies that all non-default (non-permanent) users are to be deleted from the
group.
hex_user_name
Specifies the user name to delete or modify. The value is to be supplied as a
colon separated string of hex octets.
user_name
Specifies the user name to delete or modify in ASCII format.
sec-model
Specifies the security model to use.
snmpv1
Specifies the SNMPv1 security model.
snmpv2c
Specifies the SNMPv2c security model.
usm
Specifies the SNMPv3 User-based Security Model (USM).
