create traffic queue ingress-only
ExtremeWare XOS 11.5 supports only the Summit X450 family of switches and the BlackDiamond 8800 series switch.
ExtremeWare XOS 11.5 Command Reference Guide
907
create traffic queue ingress-only
create traffic queue <queue_name> ingress-only [strict-priority]
Description
Creates an ingress-only traffic queue for use in ingress-only and ingress and egress HQoS rate limiting.
You cannot associate any egress shaping with this traffic queue; you can perform HQoS on ingressing
traffic
only
. Rate limiting allows you to control bandwidth throughout the network.
Syntax Description
Default
N/A.
Usage Guidelines
This command allows you to rate limit the HQoS ingress traffic stream as defined in this queue. You
cannot perform any egress HQoS on these ingress-only queues.
Strict priority provides a traffic queue with the following three levels of priority: high, medium, and
low. Strict priority HQoS supports one rate as an aggregate rate for the queue and can be associated
with an aggregate peak limit.
Look at the counters (using the
show traffic queue [port <port_list> | <queue_name>]
statistics
command) to see how the traffic is flowing.
Example
The following command creates the HQoS ingress-only strict priority traffic queue test:
create traffic queue test ingress-only strict-priority
History
This command was first available in ExtremeWare XOS 11.4.
Platform Availability
This command is available only on the BlackDiamond 12804 R-Series switch.
queue_name
Enter the name of the ingress-only traffic queue you are configuring. This
traffic queue rate limits only ingressing traffic.
