configure cfm domain association add end-point
ExtremeWare XOS 11.5 supports only the Summit X450 family of switches and the BlackDiamond 8800 series switch.
ExtremeWare XOS 11.5 Command Reference Guide
419
configure cfm domain association add end-point
configure cfm domain <domain_name> association <association_name> ports
<port_list> add end-point [inward-facing | outward-facing ] <mepid>
Description
Configures the maintenance end points (MEPs) for that MA; use this command to configure both the
inward-facing and outward-facing MEPs. Each MEP within a single MA must have a unique MEP ID.
Syntax Description
Default
N/A.
Usage Guidelines
Each MA needs at least two MEPs that can reach each other to exchange CCM messages.
NOTE
Ensure that you assigned the port number correctly to the inward-facing MEP and to the outward-facing MEP, or the
CCM messages go in the wrong direction.
These ports must already be in the MA (VLAN) prior to assigning a MEP function to them. If you try to
assign a port not in the MA as an end-point, the system returns the following message:
The following port(s) <portlist> are not part of the associations VLAN.
Each MEP must have unique MEPID per MA.
domain_name
Enter the domain associated with the MA you are configuring.
association_name
Enter the name of the MA for which you are configuring an MEP.
ports
Enter the port number you want to configure as either in inward-facing or an
outward-facing MEP.
inward-facing
Enter the port to be the inward-facing port of the MA; this MEP sends CCM
messages to all ports—other than the sending switch port—in this MA on this
switch.
outward-facing
Enter the port to be the outward-facing port of the MA; this MEP sends CCM
messages out of the configured physical port.
mepid
Enter a value for this MEP. The range is 1 to 8191.
NOTE: On each MA, each MEPID must be unique.