show debug
ExtremeWare XOS 11.5 supports only the Summit X450 family of switches and the BlackDiamond 8800 series switch.
ExtremeWare XOS 11.5 Command Reference Guide
1975
show debug
show debug
Description
This command displays the status of writing core dump files to the specified memory card.
Syntax Description
This command has no arguments or variables.
Default
N/A.
Usage Guidelines
By default, the switch does not write core dump files to the memory card. Use this command to verify if
you are writing core dump files to the memory card. By default, the switch does not write core dump
files to the memory card.
All Switches.
To configure the switch to write core dump files to the internal memory card, use the
configure debug core-dumps
internal-memory
command.
Modular Switches Only.
To configure a modular switch to write core dump files to the external memory
card, use the
configure debug core-dumps
memorycard
command.
Example
The following example shows if the switch is sending core dump files to the specified memory card:
show debug
Output for All Switches.
The following sample output shows that the switch is sending core dump files
to the internal memory card:
Debug Settings:
Core dumps: Enabled (internal-memory)
The following sample output shows that the switch is not sending core dump files to the specified
memory card (this is the default behavior):
Debug Settings:
Core dumps: Disabled
Modular Switches Only.
The following sample output shows that the switch is sending core dump files
to the external memory card:
Debug Settings:
Core dumps: Enabled (memorycard)
