IPv6 Unicast Commands
ExtremeWare XOS 11.5 supports only the Summit X450 family of switches and the BlackDiamond 8800 series switch.
ExtremeWare XOS 11.5 Command Reference Guide
1418
clear neighbor-discovery cache
clear neighbor-discovery cache ipv6 {<ipv6address> {vr <vr_name>} | vlan
<vlan_name> | vr <vr_name>}
Description
Deletes a dynamic entry from the neighbor cache.
Syntax Description
Default
N/A.
Usage Guidelines
This command clears dynamic entries from the neighbor cache. The
vr
option is used to specify the
virtual router on which the operation is performed. When this option is omitted it applies to VR-
Default.
When the ipv6address or vlan options are specified, only the entries with matching IPv6 addresses or
that correspond to that VLAN are cleared.
Example
The following command clears all entries from the neighbor cache:
clear neighbor-discovery cache
History
This command was first available in ExtremeWare XOS 11.2.
Platform Availability
This command is available on all platforms.
vr_name
Specifies a virtual router.
ipv6address
Specifies an IPv6 address.
vlan_name
Specifies an IPv6 configured VLAN.
