Extreme Networks ExtremeWare XOS 11.5, Справочник по командам

Страница: 209 / 2024

show session
ExtremeWare XOS 11.5 supports only the Summit X450 family of switches and the BlackDiamond 8800 series switch.
ExtremeWare XOS 11.5 Command Reference Guide
209
show session
show session {{detail} {<sessID>}} {history}
Description
Displays the currently active Telnet and console sessions communicating with the switch.
Syntax Description
Default
N/A.
Usage Guidelines
The
show session
command displays the username and IP address of the incoming Telnet session,
whether a console session is currently active, and the login time. Each session is numbered.
Beginning with ExtremeWare XOS 11.2, the switch accepts IPv6 connections. If the incoming session is
from an IPv6 address, the
show session
output indicates IPv6.
You can specify the following options to alter the session output:
●
detail
—The output for all current sessions is displayed in a list format.
●
sessID
—The output for the specified session is displayed in a list format.
●
history
—Displays a list of current and previous sessions, including the user, type of session,
location, and start and end time of the session.
The
show session
command fields are defined in Table 12 .
detail Specifies more detailed session information.
sessID Specifies a session ID number.
history Displays a list of all sessions.
Table 12: Show command field definitions
Field Definition
# Indicates session number.
Login Time Indicates login time of session.
User Indicates the user logged in for each session.
Type Indicates the type of session, for example: console, telnet, http, https.
Auth Indicates how the user is logged in.
CLI Auth Indicates the type of authentication (RADIUS and TACAS) if enabled.
Location Indicates the location (IP address) from which the user logged in. The output also
indicates if the location is an IPv6 address.