Power Over Ethernet Commands
ExtremeWare XOS 11.5 supports only the Summit X450 family of switches and the BlackDiamond 8800 series switch.
ExtremeWare XOS 11.5 Command Reference Guide
540
The following information displays only with modular PoE devices:
●
Priority—Displays the port’s configured PoE priority value, as follows:
■
Critical
■
High
■
Low
Example
The following command displays summary inline power information for ports 1 to 3 on slot 3 on a
modular switch:
show inline-power info ports 3:1-3
Following is sample output from this command:
Port State Class Volts Curr Power Fault
(mA) (Watts)
3:1 delivering class3 48.3 192 9.300 None
3:2 delivering class3 48.3 192 9.300 None
3:3 searching ------ 0.0 0 0.0 None
The following command displays detail inline power information for port 1 on slot 3:
show inline-power info detail port 3:1
Following is sample output from this command:
Port 3:1
Configured Admin State: enabled
Inline Power State : delivering
MIB Detect Status : delivering
Label :
Operator Limit : 16800 milliwatts
PD Class : class3
Max Allowed Power : 15.400 W
Measured Power : 9.400 W
Line Voltage : 48.3 Volts
Current : 193 mA
Fault Status : None
Detailed Status :
Priority : low
History
This command was first available in ExtremeWare XOS 11.1.
Platform Availability
This command is available on the G48P and G48Pe modules installed in the BlackDiamond 8800 series
switch and the Summit X450e-24p switch.