EAPS Commands
ExtremeWare XOS 11.5 supports only the Summit X450 family of switches and the BlackDiamond 8800 series switch.
ExtremeWare XOS 11.5 Command Reference Guide
1148
show eaps
show eaps {<eapsDomain>} {detail}
Description
Displays EAPS status information.
Syntax Description
Default
N/A.
Usage Guidelines
If you enter the
show eaps
command without a keyword, the command displays less than with the
detail
keyword.
Use the optional domain
eapsDomain
parameter to display status information for a specific EAPS
domain.
Some state values are different on a transit node than on a master node.
The fields displayed are as follows:
eapsDomain
Specifies the name of an EAPS domain.
detail
Specifies all available detail for each domain.
EAPS Enabled:
Current state of EAPS on this switch:
• Yes—EAPS is enabled on the switch.
• No—EAPS is not enabled.
EAPS Fast Convergence:
Displays only when Fast Convergence is on.
EAPS Display Config Warnings
Displays the setting for loop protection messages:
• On—Loop protection messages are displayed (this is the default behavior).
• Off—Loop protection messages are not displayed.
Number of EAPS instances:
Number of EAPS domains created. The maximum number of EAPS domains
per switch is 128.
Name:
The configured name for this EAPS domain.
