Commands for Configuring Slots and Ports on a Switch
ExtremeWare XOS 11.5 supports only the Summit X450 family of switches and the BlackDiamond 8800 series switch.
ExtremeWare XOS 11.5 Command Reference Guide
316
configure ports auto on
configure ports <port_list> auto on
Description
Enables autonegotiation for the particular port type.
Syntax Description
Default
Auto on for 1 Gbps ports.
Auto off for 10 Gbps ports.
Usage Guidelines
The type of ports enabled for autonegotiation are 802.3u for 10/100 Mbps ports or 802.3z for gigabit
Ethernet ports.
Flow control on gigabit Ethernet ports is enabled or disabled as part of autonegotiation. If
autonegotiation is set to off, flow control is disabled. When autonegotiation is turned on, flow control is
enabled. (See the
ExtremeWare XOS Concepts Guide
for more detailed information on flow control on
Extreme Networks devices.)
Example
The following command configures the switch to autonegotiate for slot 1, ports 2 and 4 on a modular
switch:
configure ports 1:2, 1:4 auto on
History
This command was first available in ExtremeWare XOS 10.1.
Platform Availability
This command is available on all platforms.
port_list
Specifies one or more ports or slots and ports.
