show mld group
ExtremeWare XOS 11.5 supports only the Summit X450 family of switches and the BlackDiamond 8800 series switch.
ExtremeWare XOS 11.5 Command Reference Guide
1887
show mld group
show mdl group {{vlan} {<name>} | {<v6grpipaddress>}} {MLDv2}
Description
Lists the MLD group membership for the specified VLAN.
Syntax Description
v6
Default
MLDv1.
Usage Guidelines
If no VLAN is specified all VLANs are displayed. You can also filter the display by group address and
by multicast stream sender address.
Example
The following command lists the MLD group membership for the VLAN
accounting
:
show mld group vtest3
Output from this command looks similar to the following:
Group Address Ver Vlan Port Age
ff03::1:1 1 vtest3 4:5 25
ff03::1:2 1 vtest3 4:5 25
ff02::1:ff22:124 1 vtest3 4:45 26
ff05::a:abcd 1 vtest3 4:15 23
ff05::a:abce 1 vtest3 4:15 23
ff02::1:ff22:112 1 vtest3 4:45 26
ff02::1:ff1f:a418 1 vtest3 4:45 26
History
This command was first available in ExtremeWare XOS 11.2.
Platform Availability
This command is available on all platforms.
grpipaddress
Specifies a group IPv6 address.
name
Specifies a VLAN name.
MLDv2
Display the MLD group in MLDv2 format (if group record is MLDv2 compatible,
otherwise display in earlier format).
