show forwarding configuration
ExtremeWare XOS 11.5 supports only the Summit X450 family of switches and the BlackDiamond 8800 series switch.
ExtremeWare XOS 11.5 Command Reference Guide
1983
show forwarding configuration
show forwarding configuration
Description
Displays the hardware table settings, including the configured and current hash algorithm.
Syntax Description
This command has no arguments or variables.
Default
N/A.
Usage Guidelines
The output of this command displays the following information:
●
Configured hash
—The hash algorithm configured on the switch. After a switch reboot, the switch
uses this hash algorithm.
●
Current hash
—The hash algorithm currently used by the switch.
It is possible for the values of the configured hash and the current hash to be different. For example, if
you modified the hash algorithm and have not rebooted the switch, the values might be different. In
this situation, the switch also displays the following message:
A save and reboot are required before the configured hash will take effect
Example
The following command displays the hardware forwarding algorithm configured on the switch:
show forwarding configuration
The following is sample output from this command:
Forwarding table hash algorithm
Configured hash: crc16
Current hash: crc16
History
This command was first available in ExtremeWare XOS 11.3.2.
