Configuration and Image Commands
ExtremeWare XOS 11.5 supports only the Summit X450 family of switches and the BlackDiamond 8800 series switch.
ExtremeWare XOS 11.5 Command Reference Guide
1926
Enter
y
to use the updated configuration as the default configuration. Enter
n
to cancel the operation
and keep using the current default, active configuration.
Example
The following command saves the current switch configuration to the configuration file named
XOS1
:
save configuration XOS1
The following command save the current switch configuration to the secondary configuration file:
save configuration secondary
History
This command was first available in ExtremeWare XOS 10.1.
The status messages displayed by the switch were updated in ExtremeWare XOS 11.1.
Platform Availability
This command is available on all platforms.
