show meter
ExtremeWare XOS 11.5 supports only the Summit X450 family of switches and the BlackDiamond 8800 series switch.
ExtremeWare XOS 11.5 Command Reference Guide
927
show meter
show meter
Description
Displays the configured meters.
Syntax Description
This command has no arguments or variables.
Default
N/A.
Usage Guidelines
None.
Example
The following command displays meters on the switch:
show meter
Display on the BlackDiamond 8800 series switch or Summit X450 family of switches only.
NOTE
When you are using a BlackDiamond 8800 series switch or the Summit X450 family of switches, you configure a
peak rate for QoS meters using the
configure meter <metername> {max-burst-size <burst-size>
[Gb | Kb | Mb]} {committed-rate <cir> [Gbps | Mbps | Kbps]} {out-actions [drop |
set-drop-precedence {dscp [none | <dscp-value>]}}
command.
The following is sample output from this command:
-------------------------------------------
Name Committed Rate(Kbps) Peak Rate(Kbps)
-------------------------------------------
peggy 1000000
--
Display on the BlackDiamond 12804 R-Series only.
NOTE
When you are using a BlackDiamond 12804 R-Series switch, you configure a peak rate for HQoS meters, using the
configure meter <metername> [peak-rate <pr> [Gbps | Mbps | Kbps]]
command.