Commands for Accessing the Switch
ExtremeWare XOS 11.5 supports only the Summit X450 family of switches and the BlackDiamond 8800 series switch.
ExtremeWare XOS 11.5 Command Reference Guide
110
NOTE
You must specify the target’s IPv6 address to use this functionality. DNS for IPv6 is not supported, so the traceroute
resolves to an IPv4 address if you specify a host name.
Example
The following command enables the traceroute function to a destination of 123.45.67.8:
traceroute 123.45.67.8
The following is sample output that displays when the traceroute fails:
traceroute to 10.209.10.37, 30 hops max
1 0.0.0.0 * !u * !u * !u
--- Packet Response/Error Flags ---
(*) No response, (!N) ICMP network unreachable, (!H) ICMP host unreachable,
(!P) ICMP protocol unreachable, (!F) ICMP fragmentation needed,
(!S) ICMP source route failed, (!u) Transmit error, network unreachable,
(!f) Transmit error, fragmentation needed, (!t) General transmit error
History
This command was first available in ExtremeWare XOS 10.1.
The IPv6 variable was added in ExtremeWare XOS 11.2.
The display when the command fails was added in ExtremeWare XOS 11.4.
Platform Availability
This command is available on all platforms.
