show odometers
ExtremeWare XOS 11.5 supports only the Summit X450 family of switches and the BlackDiamond 8800 series switch.
ExtremeWare XOS 11.5 Command Reference Guide
197
show odometers
show odometers
Description
Displays a counter for each component of a switch that shows how long it has been functioning since it
was manufactured.
Syntax Description
This command has no arguments or variables.
Default
N/A.
Usage Guidelines
The output from this command displays how long individual components in the switch have been
functioning since it was manufactured. This odometer counter is kept in the EEPROM of each
monitored component. On a modular switch, this means that even if you plug in the component into a
different chassis, the odometer counter is available in the new switch chassis.
Monitored Components.
On a modular switch, the odometer monitors the following components:
●
Chassis
●
MSMs
●
I/O modules
●
Power controllers
On the Summit X450 family of switches, the odometer monitors the following components:
●
Switch
●
XGM-2xn card
Recorded Statistics.
The following odometer statistics are collected by the switch:
●
Service Days—The amount of days that the component has been running
●
First Recorded Start Date—The date that the component was powered-up and began running
Depending on the software version running on your switch, the modules installed in your switch, and
the type of switch you have, additional or different odometer information may be displayed.
