configure mirroring add
ExtremeWare XOS 11.5 supports only the Summit X450 family of switches and the BlackDiamond 8800 series switch.
ExtremeWare XOS 11.5 Command Reference Guide
307
configure mirroring add
configure mirroring add [vlan <name> {port <port>}| port <port> {vlan
<name>}] {ingress | egress | ingress-and-egress}
Description
Adds a particular mirroring filter definition on the switch.
Syntax Description
Default
N/A.
Usage Guidelines
You must enable port-mirroring using the
enable mirroring to port
command before you can
configure the mirroring filter definitions.
Port mirroring configures the switch to copy all traffic associated with one or more ports to a monitor
port on the switch. The switch uses a traffic filter that copies a group of traffic to the monitor port.
Up to 16 mirroring filters and one monitor port can be configured on the switch. Frames that contain
errors are not mirrored.
vlan
Specifies a VLAN.
name
Specifies a VLAN name.
port
Specifies a port or slot and port.
port
Specifies particular ports or slots and ports.
ingress
Specifies packets be mirrored as they are received on a port.
NOTE: This parameter is available only on the BlackDiamond 8800 series
switch and the Summit X450 family of switches and only with port-based
mirroring.
egress
Specifies packets be mirrored as they are sent from a port.
NOTE: This parameter is available only on the BlackDiamond 8800 series
switch and the Summit X450 family of switches and only with port-based
mirroring.
ingress-and-egress
Specifies all forwarded packets be mirrored. This is the default setting on the
BlackDiamond 8800 series switch and the Summit X450 family of switches for
port-based mirroring.
NOTE: This parameter is available only on the BlackDiamond 8800 series
switch and the Summit X450 family of switches and only with port-based
mirroring.
