RIPng Commands
ExtremeWare XOS 11.5 supports only the Summit X450 family of switches and the BlackDiamond 8800 series switch.
ExtremeWare XOS 11.5 Command Reference Guide
1524
enable ripng originate-default
enable ripng originate-default {always} cost <metric> {tag <number>}
Description
Configures a default route to be advertised by RIPng.
Syntax Description
Default
Disabled.
Usage Guidelines
If
always
is specified, RIPng always advertises the default route to its neighbors. If always is not
specified, RIPng advertises a default route only if a reachable default route is in the system route table
(the route is learned from other neighbors).
The default route advertisement is filtered using the out policy. Use the command,
configure ripng
route-policy
, to specify the out policy.
The cost metric is inserted for all RIPng-learned, static, and direct routes injected into RIPng. The tag
value is used only by special routing applications.
Example
The following command configures a default route to be advertised by RIPng if there is a default route
in the system routing table:
enable ripng originate-default cost 7
History
This command was first available in ExtremeWare XOS 11.2.
Platform Availability
This command is available on all platforms.
always
Specifies to advertise the default route in addition to learned default route.
cost <metric>
Specifies a cost metric. The range is 1 - 15.
tag <number>
Specifies a tag number.
