configure qosprofile ports
ExtremeWare XOS 11.5 supports only the Summit X450 family of switches and the BlackDiamond 8800 series switch.
ExtremeWare XOS 11.5 Command Reference Guide
889
Default
●
Minimum bandwidth—0%
●
Maximum bandwidth—100%
●
Priority—By default, each qosprofile is assigned a different priority level:
■
QP1 - 1, Low (the lowest priority)
■
QP2 - 2, LowHi
■
QP3 - 3, Normal
■
QP4 - 4, NormalHi
■
QP5 - 5, Medium
■
QP6 - 6, MediumHi
■
QP7 - 7, High
■
QP8 - 8, HighHi (highest priority)
Usage Guidelines
NOTE
This command is not supported on BlackDiamond 8800 original modules.
If you attempt to apply this command to ports on the original BlackDiamond 8800 modules, the system
returns the following error:
ERROR: Setting minbw/maxbw is not supported on MSM-G8X I/O ports and G48T, G48P, G24X,
and 10G4X modules.
Example
The following command configures the egress QoS profile parameters of QoS profile Qp5
for specific
ports on a BlackDiamond 10808 switch:
configure qosprofile qp5 minbw 10 maxbw 80 priority HighHi ports 5:5-5:7
History
This command was first available in ExtremeWare XOS 10.1.
Committed and peak rates were added in ExtremeWare XOS 11.0. Also in ExtremeWare XOS 11.0, ports
were made mandatory.
Support for the BlackDiamond 8800 a-series and e-series modules and the Summit X450a and X450e
series switches was added in ExtremeWare XOS 11.5.
Platform Availability
This command is available on the BlackDiamond 10808, Black Diamond 12804, BlackDiamond 8800 a-
series and e-series modules, and the Summit X450a and X450e series switches.
