Command Reference Overview
ExtremeWare XOS 11.5 supports only the Summit X450 family of switches and the BlackDiamond 8800 series switch.
ExtremeWare XOS 11.5 Command Reference Guide
42
NOTE
The keyword
all
acts on all possible ports; it continues on all ports even if one port in the sequence fails.
Stand-alone Switch Numerical Ranges
Commands that require you to enter one or more port numbers on a stand-alone switch, such as the
Summit X450 switch, use the parameter
<port_list>
in the syntax.
A
<port_list>
can be a single port. For example, port 5 would be:
5
A
<port_list>
can also be a range of numbers. Separate the port numbers by a dash to enter a range of
contiguous numbers, and separate the numbers by a comma to enter a range of noncontiguous
numbers:
●
x
-
y
—Specifies a contiguous series of ports on a stand-alone switch.
●
x
,
y
—Specifies a noncontiguous series of ports on a stand-alone switch.
●
x
-
y,a,d
—Specifies a contiguous series of ports and a noncontiguous series of ports on a stand-alone
switch.
Modular Switch Numerical Ranges
Commands that require you to enter one or more port numbers on a modular switch, such as the
BlackDiamond 10K switch, use the parameter
<port_list>
in the syntax. The syntax for the port and
slot is:
port <slot_number>:<port_number>
A
<port_list>
can be one port on a particular slot. For example, port 1
on slot 3 would be:
port 3:1
A <
port_list>
can be a range of numbers. For example, ports 1 through 3 on slot 3 would be:
port 3:1-3:3
You can add additional slot and port numbers to the list, separated by a comma:
port 3:1,4:8,6:10
You can specify all ports on a particular slot, using the asterisk (*) wildcard. For example,
port 3:*
indicates all ports on slot 3.
You can specify a range of slots and ports. For example,
port 2:3-4:5
indicates slot 2, port 3 through slot 4, port 5.
