Commands for Configuring LLDP
ExtremeWare XOS 11.5 supports only the Summit X450 family of switches and the BlackDiamond 8800 series switch.
ExtremeWare XOS 11.5 Command Reference Guide
498
show lldp
show lldp {port [all | <port_list>]} {detailed}
Description
Displays LLDP configuration information for the specified port or ports. Use the
detailed
keyword to
display the configured VLANs on the port and the enabled VLAN-specific TLVs.
Syntax Description
Default
N/A.
Usage Guidelines
Use the detailed variable to display information regarding configured VLANs on the ports and any
enabled VLAN-specific TLVs.
Example
The following example displays LLDP configuration information for the switch:
# show lldp
LLDP transmit interval : 30 seconds
LLDP transmit hold multiplier : 4 (used TTL = 120 seconds)
LLDP transmit delay : 2 seconds
LLDP SNMP notification interval : 5 seconds
LLDP reinitialize delay : 2 seconds
LLDP-MED fast start repeat count : 4
LLDP Port Configuration:
Port Rx Tx SNMP Optional enabled transmit TLVs
Mode Mode Notification LLDP 802.1 802.3 MED AvEx
============================================================================
1:1 Enabled Enabled -- --D-- --- ---- CLP- ----
1:2 Enabled Enabled L- --D-- --- ---- C-P- ----
7:1 Enabled Enabled LM --D-- --- ---- CLP- ----
============================================================================
Notification: (L) lldpRemTablesChange, (M) lldpXMedTopologyChangeDetected
LLDP Flags : (P) Port Description, (N) System Name, (D) System Description
(C) System Capabilities, (M) Mgmt Address
all
Specifies all ports on the switch.
port_list
Specifies one or more ports or slots and ports.
detailed
Shows information on the configured VLANs on the port.
