show stpd ports
ExtremeWare XOS 11.5 supports only the Summit X450 family of switches and the BlackDiamond 8800 series switch.
ExtremeWare XOS 11.5 Command Reference Guide
1225
If your STPD has the same name as another component, for example a VLAN, Extreme Networks
recommends that you specify the identifying keyword as well as the name. If you do not specify the
stpd
keyword, an error message similar to the following is displayed:
%% Ambiguous command: "show Test ports"
In this example, to view all of the port settings of STPD
Test
, enter
show stpd Test ports
.
If your STPD has a name unique only to that STPD, the keyword
stpd
is optional.
Example
The following command displays the state of slot 3, ports 1 through 3 on an STPD named
s0
:
show stpd S0 ports 3:1-3:3
The following is sample output from this command:
Port Mode State Cost Flags
Priority Port ID Designated Bridge
3:1 802.1D FORWARDING 100 e------- 16
16641 00:00:00:00:00:00:00:00
3:2 802.1D FORWARDING 100 e------- 16
16642 00:00:00:00:00:00:00:00
3:3 802.1D FORWARDING 100 e------- 16
16643 00:00:00:00:00:00:00:00
Total Ports: 3
------------------------- Flags: ----------------------------
1: e=Enable, d=Disable
2: (Port role) R=Root, D=Designated, A=Alternate, B=Backup, M=Master
3: (Config type) b=broadcast, p=point-to-point, e=edge, a=auto
4: (Oper. type) b=broadcast, p=point-to-point, e=edge
5: p=proposing, a=agree
6: (partner mode) d = 802.1d, w = 802.1w, m = mstp
7: i = edgeport inconsistency
8: S = edgeport safe guard active
s = edgeport safe guard configured but inactive
9: B = Boundary, I = Internal
The following command displays the detailed information for the ports in STPD
S0
:
show stpd S0 ports detail
The following is sample output from this command:
Stpd: s0 Port: 1:1
PortId: 8002 Stp: ENABLED Path Cost: 19
External Path Cost:
Port Mode: 802.1D
Port State: FORWARDING Topology Change Ack: FALSE
Port Priority: 16
Designated Root: 00:00:00:00:00:00:00:00 Designated Cost: 0
Designated Bridge: 00:00:00:00:00:00:00:00 Designated Port Id: 0
Partner STP version: Dot1d
Edge Port Safe Guard: Disabled
Participating Vlans: Default
Stpd: s0 Port: 1:2 PortId: 8002 Stp: ENABLED Path Cost: 19
External Path Cost:
Port Mode: 802.1D
