enable icmp address-mask
ExtremeWare XOS 11.5 supports only the Summit X450 family of switches and the BlackDiamond 8800 series switch.
ExtremeWare XOS 11.5 Command Reference Guide
1377
enable icmp address-mask
enable icmp address-mask {vlan <name>}
Description
Enables the generation of an ICMP address-mask reply on one or all VLANs.
Syntax Description
Default
Disabled.
Usage Guidelines
Enables the generation of an ICMP address-mask reply (type 18, code 0) when an ICMP address mask
request is received. The default setting is disabled. If a VLAN is not specified, the command applies to
all IP interfaces.
This command only affects the generation of certain ICMP packets. Filtering of ICMP packets usually
forwarded by the switch is controlled by the access-list commands.
Example
The following command enables the generation of an ICMP address-mask reply on VLAN
accounting
:
enable icmp address-mask vlan accounting
History
This command was first available in ExtremeWare XOS 10.1.
The default was changed to disabled in ExtremeWare 11.0.
Platform Availability
This command is available on all platforms.
name
Specifies a VLAN name.
