disable inline-power
ExtremeWare XOS 11.5 supports only the Summit X450 family of switches and the BlackDiamond 8800 series switch.
ExtremeWare XOS 11.5 Command Reference Guide
519
disable inline-power
disable inline-power
Description
Shuts down PoE power currently provided on all ports on all slots.
Syntax Description
This command has no arguments or variables
Default
Enable.
Usage Guidelines
You can control whether inline power is provided to the system by using the
disable inline-power
command and the
enable inline-power
command. Using the
disable inline-power
command shuts
down inline power currently provided on the entire switch or to specified ports and slots. Disabling
inline power to a switch, port, or slot immediately removes power to any connected PDs. By default,
inline power provided to all ports is enabled.
NOTE
Disabling inline power using the
disable inline-power
command does not affect the data traffic traversing the port.
And, disabling the port using the
disable port
command does not affect the inline power supplied to the port.
On modular switches, disabling inline power does not allow PoE power reserved for slots to be
allocated to other slots that may be needing more power to become operational. However, when you
issue the command
disable slot
on a slot holding a PoE module, the inline power is also disabled;
that slot is totally offline.
NOTE
Inline power cannot be delivered to connected PDs unless the Summit X450e-24p switch is powered; on modular
switches, the BlackDiamond 8800 chassis and module must be powered.
Example
The following command shuts down inline power currently provided to all ports and all slots:
disable inline-power
History
This command was first available in ExtremeWare XOS 11.1.
