show checkpoint-data
ExtremeWare XOS 11.5 supports only the Summit X450 family of switches and the BlackDiamond 8800 series switch.
ExtremeWare XOS 11.5 Command Reference Guide
191
show checkpoint-data
show checkpoint-data {<process>}
Description
Displays the status of one or more processes being copied from the master MSM to the backup MSM.
Syntax Description
Default
N/A.
Usage Guidelines
This command displays, in percentages, the amount of internal state copying completed by each process
and the traffic statistics between the process on both the master and the backup MSMs.
This command is also helpful in debugging synchronization problems that occur at run-time. To check
the status of synchronizing the MSMs, use the
show switch
command.
Depending on the software version running on your switch and the type of switch you have, additional
or different checkpoint status information may be displayed.
Example
The following command displays the checkpointing status and the traffic statics of all of the processes
between the master and the backup MSM:
show checkpoint-data
The following is sample output from this command:
Process Tx Rx Errors Sent Total % Chkpt Debug-info
----------------------------------------------------------------------------
devmgr 3812 1731 0 3 3 100% ON OK 1 (00008853)
dirser 0 0 0 0 0 0% ON OK 1 (000008D3)
ems 5 0 0 0 0 100% ON OK 1 (000008D3)
nodemgr 0 0 0 0 0 0% ON OK 1 (000008D3)
snmpSubagent 0 0 0 0 0 0% ON OK 1 (000018D3)
snmpMaster 0 0 0 0 0 0% ON OK 1 (000008D3)
cli 0 0 0 0 0 0% ON OK 1 (000018D3)
edp 0 0 0 0 0 0% ON OK 1 (000008D3)
cfgmgr 82 82 0 1 1 100% ON OK 1 (000018D3)
elrp 0 0 0 0 0 0% ON OK 1 (000008D3)
vlan 1047 1 0 0 0 100% ON OK 1 (000008D3)
aaa 0 0 0 0 0 0% ON OK 1 (000008D3)
process
Specifies the name of the processes being copied.
