show vman
ExtremeWare XOS 11.5 supports only the Summit X450 family of switches and the BlackDiamond 8800 series switch.
ExtremeWare XOS 11.5 Command Reference Guide
787
Displaying designated port for flooding control for rate-limited vMANs (BlackDiamond 12804 R-Series switch
only).
The following is sample output from the
show vman <vlan_name>
command on the
BlackDiamond 12804 R-Series switch that is configured with vMAN ACLs and a designated port (the
designated port information is on the ERL Designated Port line):
VMAN Interface with name vman110 created by user
Admin State: Enabled Tagging: 802.1Q Tag 110
Priority: 802.1P Priority 0
Virtual router: VR-Default
IPv6: None
STPD: None
Protocol: Match all unfiltered protocols
Loopback: Disabled
NetLogin: Disabled
ERL Designated Port: 6:2
QosProfile: QP1
Ports: 4. (Number of active ports=4)
Untag: *2:1, *2:4
Tag: *6:1, *6:2
Flags: (*) Active, (!) Disabled, (g) Load Sharing port
(b) Port blocked on the vlan, (a) Authenticated NetLogin port
(u) Unauthenticated NetLogin port, (m) Mac-Based port
History
This command was first available in ExtremeWare XOS 11.0.
Information on IEE 802.1ah was added in ExtremeWare XOS 11.4.
Platform Availability
This command is available on all platforms with an Advanced Edge, a Core, or an Advanced Core
license.
The 802.1ah information is available only on the BlackDiamond 10808 and 12804 switch; the designated
port information is available only on the BlackDiamond 12804 R-series switch.
